The designer or installer will be able to modify the operating settings infinitely, with no need for additional structural alterations. Every CMB maybe connected to up to eight command devices of any kind or brand, making the most of the simplicity and flexibility of clean contacts; eight motor units (relè or dimmer) designed to satisfy every customers needs and the use of an infrared sensor to actuate any device via remote control.
Any command that passes through a CMB can reach one or more outway channels of any CMB block in the wiring system, activating the relative transistor, relè or dimmer.

CMB blocks are able to function independently or in cooperation with other blocks via the bus. Some examples of the primary functions of a traditional wiring system are:
:: The simultaneous command of many tasks
:: System diagnostics
:: Communication with supervision and control systems using RS232 open protocol    serial interface. (Software, touch-screen, remote web interface, telephone    interface.)

The electrical system produced with EDS can support up to 255 inter-connected modules with a primary bus (EDS), therefore the system can perform up to 2040 checks or commands at a given time. Every module is identified with an unambiguous address, by means of specific software and through using a RS232 interface accessed through a PC; the same interface controls the centralized and computerized administration of the whole system, thus the resulting implementation of vanguard home automation functions. By realising the logical and obvious potential of the EDS, it is possible to lower costs in comparison to a system wired in the traditional manner.
The modules can physically separate the commands (12V) from the actions (220V) and can be reset should any risk be encountered. CMB blocks are available in many types, in order to cater for every need in existing and new plants.
EDS is an open system: World Data Bus offers its communication procedure to all, free of charge. Thus providing the opportunity for everyone to develop their own revolutionary home automation system, capable of integrating several systems together, exploiting the bus system as a centrepiece.

The EDS system adds utility in comparison with traditional electrical systems. EDS makes it easier for the system integrator to function and furthermore reduces the time required for processes to be completed, decreasing the number of wires that the electric plant will need, thus there will be no need for additional re-wiring work and every transformation will be easier and faster, with no need of any particular electronic comprehension.

In comparison to traditional wiring systems, EDS is able to:
::	Lower costs of materials required and manpower necessary for installation of new wiring systems. Moreover, if any further work is required it can be performed without causing any more alterations to the building.
::	Produce complex and efficient plants to supervise and control the processes of industrial and mass production companies. A traditional wiring system would require more complex and expensive procedures to attain the same result.
::	Change all the functions of your electric plant, as YOU wish, with no need of any further modifications to the wiring system.
::	Set up scenarios and backgrounds to your preference.
::	Add new functions to your home automation system at any time thanks to its great modular quality.
::	Re-wire old electric systems or create new ones using a new key, thus rendering all systems open to home automation. It will be possible to integrate different sub-systems at any time, for example; to handle complex scenarios easily, to supervise the whole home automation system by means of a touch screen, to use telephone or remote web interfaces to always be in touch with your smart home.
::	Ensure no risk of system crashes or explosion, the system works using 12v energy voltage.
::	Dramatically reduce electric pollution and energy waste.

EDS is a system to technology BUS which bases on small letters electronic modules of monitoring and performance, with high performances they can be lodged in all classic infrastructures of a traditional electric device (like boxes 503,504 and derivations), that are able to communicate between them through a BUS until 2 km of distance.
EDS system is based on distributed logic and doesn't need anything master control. All communications about EDS system are bidirectional type customizable address also after his installation from whichever point of the device. The heart of EDS is made by nodes realized with microcontrollers of last generation named BMC. Every BMC is able to carry out independently, without using the master control, command performance and output's function, distributing information related to Bus EDS to implement special scenes in cooperation with other BMC.
Click here to read the TECNICAL SHEET
Click here to read the BROCHURE

The provision of technical training on all its products to all customers interested in the new civil and industrial electric system concept. The training courses are addressed to electric system integrators, home automation designers and professionals in general.